Sometimes usb drives might deliver a message to press a button before the pc will boot from your usb device. In order to boot from another device other than the hard drive you have to enable legacy mode in the bios. Then you should be able to boot from the usb flash drive. Select the system configuration tab and then select boot order. See if tapping the esc key at the beginning of the hp welcome screen gives you a menu of options. Please shutdown the computer using the power button press and hold for few seconds until it powers off 2. Select the mbr partition scheme for bios or uefi and if your laptop has uefi bios then select the other two options. Please note that the usb device needs to be on top of boot device list. Insert the bootable windows flash drive 3. After installing rufus simply select the iso file from the file manager and accept all settings when the popup window appears.
How To Boot From Usb In Hp Pavilion Laptop Usb Boot Option Mbr Youtube You may be able to select the legacy boot options menu from there. Use the up or down arrow key to select the usb flash drive and then press enter. If you don't want to use MS account, don't enable updates or connect to the internet during installation.The bios settings menu is accessible by pressing the f2 or the f6 key on some computers.
Go to install and delete ALL partitions on the SSD till you have one and only one unallocated space and then proceed. You will see two options for the USB drive. To install as UEFI-GPT you must boot the installation drive as UEFI.Īs you have a new MB, you should install as UEFI-GPTĭetach any other drives (SATA or Power cable) from the MB.ĭuring POST, press F12(?) to launch the boot menu. To install as Legacy-MBR you must boot the installation drive as Legacy Windows can be installed in two ways: Legacy-MBR or UEFI-GPT On Win 10, mount the iso file and copy all files and folders to the USB drive.ĭisable fast boot and secure boot (you can turn it on after installation) If you have a Win 10 installation iso file Select disk n (replace n by the USB drive number obtained with list disk) Open a CMD window as administrator and type: So the USB is detected but it can't be used as bootable.ĤeverOt, Please edit your profile with ALL your hardware specs. My main PC detects the drive with all the files but the laptop doesn't show files like "setup.exe" I don't want to use MCT because I can't find a version that installs 2004. To change OS I formatted the unit and created a bootable USB again with Rufus. Although I don't know why this happens, since I used the same usb drive to install other systems (ubuntu, kali and windows 7) on other computers and they were detected.
Apparently there was something wrong with the first flash drive.I tried on my main PC and it wasn't recognized.
However, I succeeded when I tried a different flash drive. The booting computer just couldn't see it. Recently I tried to make a bootable flash drive but was unsuccessful. One other possibility is the flash drive is bad. The current version is: MediaCreationTool20H2.exe You can also make the bootable flash drive with the Windows Media Creation Tool.
It looks like you did the right thing according to HP.Īre you sure you made the boot flash drive with Rufus correctly? If you have access to another computer you can try it with it.